Related to ROKU

First, ensure that the signal is not blocking and remove the obstruction that blocks the device.
Then, make sure to reset the batteries as sometimes this might also be the reason for remote problems.
Try to change the old batteries with new ones.
Then, restart both the Roku streaming device and the remote.
Take the batteries out by opening the compartment at the rear of the remote.
Next, disconnect the power cord from the Roku device.
After 5 seconds, connect the power cord back.
The Roku home screen will be displayed on the TV. Now, insert the batteries into the remote.
After 30 seconds, the connection will be shown or check it by pressing a button.

Open the back compartment of the remote and take out the batteries.
Unplug the power cable from the Roku device.After some time, connect the power cable.
Insert the batteries back once when the Roku home screen is displayed on the home screen.Now, long-press the pairing button in the battery compartment until the remote light starts to flash.
The connection will be shown after some time, and the pairing dialog box will appear on the screen.

If you face Wi-Fi issues on the TCL Roku TV, you can follow these guidelines to resolve them.

Take the batteries out from the remote and unplug the power cable from the Roku streaming device.
After 5 seconds, plug the cable.
Insert the new batteries once the home screen is displayed on the TV.

First, make sure that there are no objects that are blocking the signal.
Remove the objects that are blocking the signal.
Then, reset the batteries by removing them and placing them back into the remote.
Next, change the batteries of the remote with the new ones.
Open the back compartment and remove the old batteries and replace them with the new ones.
Restart the Roku device.
First, remove the batteries from the remote compartment.
Unplug the power cable from the Roku device.
Now, connect the power cable after some time.
Next, wait until the Home screen is displayed on the TV and now insert the batteries pack to the remote.
Check if the connection works by pressing some button.

First, check whether the remote is compatible with the Roku player.
Now, make sure that the batteries haven’t run out.
Reset the Roku remote.
First, take out the batteries from the Roku remote.
Then, cut the power supply to the Roku box.
Launch Settings ->System->System Restart-> Restart.
Now, wait for some time and plug the Roku box back to the power.
Make sure that you wait until the Home screen is loaded.
Then, put the batteries back into the Roku remote.
Next, check for the HDMI Interface and make sure that it is enabling the streaming stick to its position. Now, check the Wi-Fi connection.
If the Roku Remote Problems issue persists, change the Roku remote.

Follow the solutions given below to rectify the Roku 3 remote problem.

First, you need to take the battery from your Roku 3 remote.
Disconnect your Roku 3 device from the power source.
Reconnect your Roku 3 device to the electrical socket using the power cable after five seconds.
After plugging the power cable to the Roku 3 device, place the new battery in the Roku 3 remote.
The next step you have to do to is to resolve the problem is paring your Roku 3 remote to the Roku device. Make sure to not hold the Pairing button for not more than 3 seconds.
Use a new HDMI extension cable to establish a connection between the stick and the Roku device.
Check the internet connection of your Roku device.
In the worst case, you have to replace the Roku 3 remote with a new compatible remote for your Roku device.

Proceed with the solutions mentioned below to resolve the Roku 4 remote problem.

Replace the battery of your Roku 4 remote.
Power cycle your Roku device by reconnecting it to the power source using the power cord.
Find the Pairing button on your Roku 4 remote and then hold it for four seconds to pair your Roku 3 remote with your Roku device.
On your Roku device, select the Settings option, and go to Network -> Set up connection.
Select the Wireless option and then establish a strong wireless network connection to your Roku device.
Reconfigure the network setting of your wireless router and then set the range of the channel. When prompted, reboot your router.
If you are not able to resolve the Roku 4 remote problem after following the steps mentioned above, you need to replace the Roku 4 remote.

The first fix is to check if the signal between the Roku remote and device.
If there is any object that is blocking the signal, then remove it and try pairing.
The next solution is to reset the batteries. Open the back panel of the remote and take the batteries from their slot.
After a few seconds, place them in the remote itself and perform the pairing process now.
If it does not work, replace the old batteries with a new one. If the batteries run out of charge, then this problem will occur.
If the Roku Remote Problems is not rectified, then replace the remote with a new one or get assistance from the experts.

ROKU ULTRA REMOTE PROBLEMS

Initially, you have to restart the Roku Stick and the remote to rectify the issue.
You can restart the Roku Stick from the Settings menu. Reset your remote by removing the batteries from it and inserting them after a few seconds.
Try to re-pair the remote to the Roku Stick. First, take off the back compartment of the remote and remove the batteries you have inserted.
Disconnect the Roku device from the power supply for a few minutes.
Once the home screen is displayed, you have to insert the batteries in the correct slot.

Press the Pairing button and hold it for a few seconds. Release it once the Pairing light starts to blink.
Replace the batteries if the connection fails.
Make use of an HDMI Extension cable to connect the Roku Stick to the TV.
Make sure you have connected the Roku device to a 5GHz wireless network.
The next solution is to modify the wireless channel of your router. Replace the Roku Remote Problems if required.